IMPORTANT: Starting March 1, 2026, billing for Science of Accuracy subscriptions ends permanently.
Website access and standalone content will be discontinued soon after. Transition now to AB Quantum™ to keep enjoying – and dramatically enhance – your educational journey through AB Quantum™ which now incorporates the Science of Accuracy Academy™ in the AB Learn tool and directly interact with AB content using AB Spotter.
The Science of Accuracy is Transitioning to AB Quantum™ with AB Learn and AB Spotter
The podcasts, instructional videos, and other content previously on The Science of Accuracy Academy™ site are now accessible via AB Learn, built directly into AB Quantum™ and available with a PRO-level subscription. No more separate logins or browsers: watch, listen, and learn on the go, then immediately apply insights directly in AB Quantum™.
The Future Is Here: AB Spotter – Your Personal Ballistics Expert
With the latest AB Quantum™ update (3.5) and a PRO level subscription, we’ve integrated AB Spotter: an advanced AI assistant trained exclusively on the complete Applied Ballistics knowledge database. This includes:
- All Applied Ballistics books
- Every white paper and technical resource ever produced
- The full library of podcasts and videos from The Science of Accuracy Academy™
- Device user manuals, setup guides, and troubleshooting documents
AB Spotter lets you directly interact with this vast expertise in real time. Ask detailed ballistics questions – from deep dives into aerodynamic principles, spin drift causes and corrections, precise WEZ assessments, gun profile optimization, to app settings, Bluetooth connectivity issues, device compatibility, licensing, and more – and get accurate, trustworthy answers grounded solely in Applied Ballistics’ authoritative sources. It’s like having Bryan Litz and the entire AB team available 24/7 right inside your phone, ready to explain concepts, solve problems, and guide you to better shots.
Benefits of Switching to AB Quantum
- Direct, Conversational Access to AB Knowledge: AB Spotter turns passive reading/watching into active Q&A – get instant, personalized explanations for any ballistics topic or app/device question.
- More Cost-Effective: No separate subscription required for education – AB Learn and AB Spotter are part of AB Quantum’s ecosystem.
- Superior On-the-Go Experience: Mobile-first design means your full library + AI expert travel with you to the range, hunt, or match – ask questions in the field and get answers without delay.
Update 3.5 featuring AB Spotter and AB Learn is available now. Download today, subscribe, and explore AB Spotter by asking your toughest ballistics questions, and experience the next level of precision shooting education and support.
Use what champions are using is smetimes easier said then done. In Europe those choises are not available most of a time. And when they are, it is a limited quantity sold quickly, costing fortune.
Some of us have to look at alternatives. LOT to LOT variance is not a big deal with most of alternatives. One I am using is very consistent LOT to LOT. Problem is a change in a production if it happens.
For example LOTs I am using now (3 LOTs checked) are completly different from the LOTs I was using before. Year 2022 look as changing point.
Difference is so huge that indeed this is a different bullet. Not only that drag is significantly lower but stability requirement too. According to McCoy McGyro minimum twist is slower now. Thus static stability factor higher.
Fact I am pointing them is making that difference even higher and more complicated.
But the new LOTs performs much better then the old ones (very close if not equal to champions choice), so I will continue to use.
Now I have to calibrate ballistic firing solution. With a different bullet then entered into that solution. Using only MV. Good luck with that.
I believe that situation as described is more frequent then it is discussed. And that many shooters having unsolvable problems with calibration are actually shooting the different bullet from the one in the calculator. Yes, titles on a box and in calculator matches, but not the bullets. Just they are not so detailed to notice the real problem they have, but blame the calculator, scope, skills, 3 shots group center……. instead of not published change in a bullet production resulting in a basically new bullet.
For those situations, admiting that altering some other inputs beside MV might be a good idea. Like BC and bullet lenght, followed by a MV calibration. But if it is really known what the problem is and in which magnitude
Nowadays it is not so hard to check did BC change. Labradar (track to 100yd) can do that if change is big, although calculated BC is not usable. I am using this to check effectivness of pointing as smallest meplat is not always a good choice, nor highest BC (peak) in a respect of BC SD (labradar cannot check this).
Bit more advanced can even use tools like McCoy Mc Drag and adapt drag coefficients if they have reliable and repetable range results, which is far away from easy and quick, that is true. But it can be done in a Mach range bullet is used. Just to have a good firing solution in a used range, not the fully correct drag curve.
What I want say is. Although calibrating only MV in supersonic flight is a best way to go. There are exceptions. Sometimes it is necessary to inform the calculatir that different bullet is used.
One crucial and not mentioned input variable is sight height over bore. Geometrically, if you “eyeball” that measurement you are introducing unnecessary error into your ballistic calculator.
Thanks for the video guys, really enjoyed it.